dmesg - Intel Xeon E5-2620 0
Linux version 6.1.30-1-lts (linux-lts@archlinux) (gcc (GCC) 13.1.1 20230429, GNU ld (GNU Binutils) 2.40.0) #1 SMP PREEMPT_DYNAMIC Wed, 24 May 2023 17:18:57 +0000
Command line: BOOT_IMAGE=/sysresccd/boot/x86_64/vmlinuz archisobasedir=sysresccd archisolabel=RESCUE1001 iomem=relaxed copytoram
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
signal: max sigframe size: 1776
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x00000000bb0a9fff] usable
BIOS-e820: [mem 0x00000000bb0aa000-0x00000000bb0e2fff] reserved
BIOS-e820: [mem 0x00000000bb0e3000-0x00000000bb1eefff] ACPI data
BIOS-e820: [mem 0x00000000bb1ef000-0x00000000bb3f4fff] ACPI NVS
BIOS-e820: [mem 0x00000000bb3f5000-0x00000000bb865fff] reserved
BIOS-e820: [mem 0x00000000bb866000-0x00000000bb895fff] type 20
BIOS-e820: [mem 0x00000000bb896000-0x00000000bb896fff] usable
BIOS-e820: [mem 0x00000000bb897000-0x00000000bb91cfff] ACPI NVS
BIOS-e820: [mem 0x00000000bb91d000-0x00000000bbd25fff] usable
BIOS-e820: [mem 0x00000000bbd26000-0x00000000bbff3fff] reserved
BIOS-e820: [mem 0x00000000bbff4000-0x00000000bbffffff] usable
BIOS-e820: [mem 0x00000000d0000000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000083fffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi: ESRT=0xbb864c98 ACPI 2.0=0xbb118000 SMBIOS=0xf04d0 ACPI=0xbb118000 MOKvar=0xb05ab000
SMBIOS 2.7 present.
DMI: OEM X79G/X79G, BIOS 4.6.5 08/25/2022
tsc: Fast TSC calibration using PIT
tsc: Detected 2000.019 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x840000 max_arch_pfn = 0x400000000
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
total RAM covered: 32736M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64M num_reg: 7 lose cover RAM: 0G
e820: update [mem 0xbe000000-0xffffffff] usable ==> reserved
last_pfn = 0xbc000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd920-0x000fd92f]
esrt: Reserving ESRT space from 0x00000000bb864c98 to 0x00000000bb864cd0.
e820: update [mem 0xb05ab000-0xb05abfff] usable ==> reserved
Using GB pages for direct mapping
Secure boot disabled
RAMDISK: [mem 0x2ff35000-0x33f91fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000BB118000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000BB118080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000BB120A38 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000BB118188 0088AE (v02 ALASKA A M I 00000020 INTL 20051117)
ACPI: FACS 0x00000000BB3F2F80 000040
ACPI: APIC 0x00000000BB120B48 000100 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000BB120C48 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000BB120C90 00003C (v01 ALASKA OEMMCFG. 01072009 MSFT 00000097)
ACPI: HPET 0x00000000BB120CD0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000BB120D08 0CD380 (v02 INTEL CpuPm 00004000 INTL 20051117)
ACPI: EINJ 0x00000000BB1EE088 000130 (v01 AMI AMI EINJ 00000000 00000000)
ACPI: ERST 0x00000000BB1EE1B8 000230 (v01 AMIER AMI ERST 00000000 00000000)
ACPI: HEST 0x00000000BB1EE3E8 0000A8 (v01 AMI AMI HEST 00000000 00000000)
ACPI: BERT 0x00000000BB1EE490 000030 (v01 AMI AMI BERT 00000000 00000000)
ACPI: DMAR 0x00000000BB1EE4C0 0000BC (v01 A M I OEMDMAR 00000001 INTL 00000001)
ACPI: Reserving FACP table memory at [mem 0xbb120a38-0xbb120b43]
ACPI: Reserving DSDT table memory at [mem 0xbb118188-0xbb120a35]
ACPI: Reserving FACS table memory at [mem 0xbb3f2f80-0xbb3f2fbf]
ACPI: Reserving APIC table memory at [mem 0xbb120b48-0xbb120c47]
ACPI: Reserving FPDT table memory at [mem 0xbb120c48-0xbb120c8b]
ACPI: Reserving MCFG table memory at [mem 0xbb120c90-0xbb120ccb]
ACPI: Reserving HPET table memory at [mem 0xbb120cd0-0xbb120d07]
ACPI: Reserving SSDT table memory at [mem 0xbb120d08-0xbb1ee087]
ACPI: Reserving EINJ table memory at [mem 0xbb1ee088-0xbb1ee1b7]
ACPI: Reserving ERST table memory at [mem 0xbb1ee1b8-0xbb1ee3e7]
ACPI: Reserving HEST table memory at [mem 0xbb1ee3e8-0xbb1ee48f]
ACPI: Reserving BERT table memory at [mem 0xbb1ee490-0xbb1ee4bf]
ACPI: Reserving DMAR table memory at [mem 0xbb1ee4c0-0xbb1ee57b]
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000083fffffff]
NODE_DATA(0) allocated [mem 0x83fffb000-0x83fffffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000083fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x00000000bb0a9fff]
node 0: [mem 0x00000000bb896000-0x00000000bb896fff]
node 0: [mem 0x00000000bb91d000-0x00000000bbd25fff]
node 0: [mem 0x00000000bbff4000-0x00000000bbffffff]
node 0: [mem 0x0000000100000000-0x000000083fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000083fffffff]
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 96 pages in unavailable ranges
On node 0, zone DMA32: 2028 pages in unavailable ranges
On node 0, zone DMA32: 134 pages in unavailable ranges
On node 0, zone DMA32: 718 pages in unavailable ranges
On node 0, zone Normal: 16384 pages in unavailable ranges
ACPI: PM-Timer IO Port: 0x408
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
TSC deadline timer available
smpboot: Allowing 12 CPUs, 0 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0xb05ab000-0xb05abfff]
PM: hibernation: Registered nosave memory: [mem 0xbb0aa000-0xbb0e2fff]
PM: hibernation: Registered nosave memory: [mem 0xbb0e3000-0xbb1eefff]
PM: hibernation: Registered nosave memory: [mem 0xbb1ef000-0xbb3f4fff]
PM: hibernation: Registered nosave memory: [mem 0xbb3f5000-0xbb865fff]
PM: hibernation: Registered nosave memory: [mem 0xbb866000-0xbb895fff]
PM: hibernation: Registered nosave memory: [mem 0xbb897000-0xbb91cfff]
PM: hibernation: Registered nosave memory: [mem 0xbbd26000-0xbbff3fff]
PM: hibernation: Registered nosave memory: [mem 0xbc000000-0xcfffffff]
PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xdfffffff]
PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xfed1bfff]
PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0xe0000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:320 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u262144
pcpu-alloc: s221184 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- --
Fallback order for Node 0: 0
Built 1 zonelists, mobility grouping on. Total pages: 8238317
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/sysresccd/boot/x86_64/vmlinuz archisobasedir=sysresccd archisolabel=RESCUE1001 iomem=relaxed copytoram
Unknown kernel command line parameters "copytoram BOOT_IMAGE=/sysresccd/boot/x86_64/vmlinuz archisobasedir=sysresccd archisolabel=RESCUE1001", will be passed to user space.
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
mem auto-init: stack:all(zero), heap alloc:on, heap free:off
software IO TLB: area num 16.
Memory: 32532860K/33476988K available (16391K kernel code, 2138K rwdata, 11072K rodata, 2148K init, 5356K bss, 943868K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 46437 entries in 182 pages
ftrace: allocated 182 pages with 5 groups
Dynamic Preempt: voluntary
rcu: Preemptible hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=12.
Trampoline variant of Tasks RCU enabled.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12
NR_IRQS: 20736, nr_irqs: 928, preallocated irqs: 16
rcu: srcu_init: Setting srcu_struct sizes based on contention.
kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20220331
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 46
DMAR: DRHD base: 0x000000fbffc000 flags: 0x1
DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0462 ecap f020ff
DMAR: RMRR base: 0x000000bb7b8000 end: 0x000000bb7c6fff
DMAR: ATSR flags: 0x0
DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0
DMAR-IR: IOAPIC id 0 under DRHD base 0xfbffc000 IOMMU 0
DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 0
DMAR-IR: HPET id 0 under DRHD base 0xfbffc000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1cd4402919b, max_idle_ns: 440795210636 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 4001.70 BogoMIPS (lpj=6666730)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
landlock: Up and running.
Yama: becoming mindful.
LSM support for eBPF active
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Retpolines
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
Speculative Store Bypass: Vulnerable
MDS: Vulnerable: Clear CPU buffers attempted, no microcode
MMIO Stale Data: Unknown: No mitigations
Freeing SMP alternatives memory: 40K
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2620 0 @ 2.00GHz (family: 0x6, model: 0x2d, stepping: 0x7)
cblist_init_generic: Setting adjustable number of callback queues.
cblist_init_generic: Setting shift to 4 and lim to 1.
cblist_init_generic: Setting shift to 4 and lim to 1.
cblist_init_generic: Setting shift to 4 and lim to 1.
Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Estimated ratio of average max frequency by base frequency (times 1024): 1228
rcu: Hierarchical SRCU implementation.
rcu: Max phase no-delay instances is 1000.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
TSC synchronization [CPU#0 -> CPU#1]:
Measured 7895961078272 cycles TSC warp between CPUs, turning off TSC clock.
tsc: Marking TSC unstable due to check_tsc_sync_source failed
#2 #3 #4 #5 #6
MDS CPU bug present and SMT on, data leak possible. See for more details.
#7 #8 #9 #10 #11
smp: Brought up 1 node, 12 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 12 processors activated (48019.47 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
ACPI: PM: Registering ACPI NVS region [mem 0xbb1ef000-0xbb3f4fff] (2121728 bytes)
ACPI: PM: Registering ACPI NVS region [mem 0xbb897000-0xbb91cfff] (548864 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 20:34:14, date: 2023-08-23
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1692822854.973:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xd0000000-0xdfffffff] (base 0xd0000000)
PCI: MMCONFIG at [mem 0xd0000000-0xdfffffff] reserved in E820
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: 2 ACPI AML tables successfully acquired and loaded
ACPI: Interpreter enabled
ACPI: PM: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
GHES: APEI firmware first mode is enabled by WHEA _OSC.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
PCI: Using E820 reservations for host bridge windows
ACPI: Enabled 5 GPEs in block 00 to 3F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME AER LTR DPC]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xcc000000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:3c00] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3c02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: [8086:3c03] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:3c04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:3c08] type 01 class 0x060400
pci 0000:00:03.0: enabling Extended Tags
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [8086:3c20] type 00 class 0x088000
pci 0000:00:04.0: reg 0x10: [mem 0xfb220000-0xfb223fff 64bit]
pci 0000:00:04.1: [8086:3c21] type 00 class 0x088000
pci 0000:00:04.1: reg 0x10: [mem 0xfb21c000-0xfb21ffff 64bit]
pci 0000:00:04.2: [8086:3c22] type 00 class 0x088000
pci 0000:00:04.2: reg 0x10: [mem 0xfb218000-0xfb21bfff 64bit]
pci 0000:00:04.3: [8086:3c23] type 00 class 0x088000
pci 0000:00:04.3: reg 0x10: [mem 0xfb214000-0xfb217fff 64bit]
pci 0000:00:04.4: [8086:3c24] type 00 class 0x088000
pci 0000:00:04.4: reg 0x10: [mem 0xfb210000-0xfb213fff 64bit]
pci 0000:00:04.5: [8086:3c25] type 00 class 0x088000
pci 0000:00:04.5: reg 0x10: [mem 0xfb20c000-0xfb20ffff 64bit]
pci 0000:00:04.6: [8086:3c26] type 00 class 0x088000
pci 0000:00:04.6: reg 0x10: [mem 0xfb208000-0xfb20bfff 64bit]
pci 0000:00:04.7: [8086:3c27] type 00 class 0x088000
pci 0000:00:04.7: reg 0x10: [mem 0xfb204000-0xfb207fff 64bit]
pci 0000:00:05.0: [8086:3c28] type 00 class 0x088000
pci 0000:00:05.2: [8086:3c2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:3c2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfb229000-0xfb229fff]
pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfb227000-0xfb2273ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1d20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfb200000-0xfb203fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:1d18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfb226000-0xfb2263ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfb225000-0xfb2257ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfb224000-0xfb2240ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:03:00.0: [10de:01d1] type 00 class 0x030000
pci 0000:03:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:03:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:03:00.0: reg 0x1c: [mem 0xf9000000-0xf9ffffff 64bit]
pci 0000:03:00.0: reg 0x30: [mem 0xfb000000-0xfb01ffff pref]
pci 0000:03:00.0: BAR 1: assigned to efifb
pci 0000:03:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:00:02.0: PCI bridge to [bus 03]
pci 0000:00:02.0: bridge window [mem 0xf9000000-0xfb0fffff]
pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 04]
pci 0000:00:11.0: PCI bridge to [bus 05]
pci 0000:00:1c.0: PCI bridge to [bus 06]
pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:07:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:07:00.0: reg 0x18: [mem 0xfb104000-0xfb104fff 64bit]
pci 0000:07:00.0: reg 0x20: [mem 0xfb100000-0xfb103fff 64bit]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 07]
pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff]
pci_bus 0000:08: extended config space not accessible
pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xcc000000-0xffffffff window] (subtractive decode)
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:08.0: [8086:3c80] type 00 class 0x088000
pci 0000:ff:08.3: [8086:3c83] type 00 class 0x088000
pci 0000:ff:08.4: [8086:3c84] type 00 class 0x088000
pci 0000:ff:09.0: [8086:3c90] type 00 class 0x088000
pci 0000:ff:09.3: [8086:3c93] type 00 class 0x088000
pci 0000:ff:09.4: [8086:3c94] type 00 class 0x088000
pci 0000:ff:0a.0: [8086:3cc0] type 00 class 0x088000
pci 0000:ff:0a.1: [8086:3cc1] type 00 class 0x088000
pci 0000:ff:0a.2: [8086:3cc2] type 00 class 0x088000
pci 0000:ff:0a.3: [8086:3cd0] type 00 class 0x088000
pci 0000:ff:0b.0: [8086:3ce0] type 00 class 0x088000
pci 0000:ff:0b.3: [8086:3ce3] type 00 class 0x088000
pci 0000:ff:0c.0: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.6: [8086:3cf4] type 00 class 0x088000
pci 0000:ff:0c.7: [8086:3cf6] type 00 class 0x088000
pci 0000:ff:0d.0: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.1: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.2: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.6: [8086:3cf5] type 00 class 0x088000
pci 0000:ff:0e.0: [8086:3ca0] type 00 class 0x088000
pci 0000:ff:0e.1: [8086:3c46] type 00 class 0x110100
pci 0000:ff:0f.0: [8086:3ca8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:3c71] type 00 class 0x088000
pci 0000:ff:0f.2: [8086:3caa] type 00 class 0x088000
pci 0000:ff:0f.3: [8086:3cab] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:3cac] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:3cad] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:3cae] type 00 class 0x088000
pci 0000:ff:10.0: [8086:3cb0] type 00 class 0x088000
pci 0000:ff:10.1: [8086:3cb1] type 00 class 0x088000
pci 0000:ff:10.2: [8086:3cb2] type 00 class 0x088000
pci 0000:ff:10.3: [8086:3cb3] type 00 class 0x088000
pci 0000:ff:10.4: [8086:3cb4] type 00 class 0x088000
pci 0000:ff:10.5: [8086:3cb5] type 00 class 0x088000
pci 0000:ff:10.6: [8086:3cb6] type 00 class 0x088000
pci 0000:ff:10.7: [8086:3cb7] type 00 class 0x088000
pci 0000:ff:11.0: [8086:3cb8] type 00 class 0x088000
pci 0000:ff:13.0: [8086:3ce4] type 00 class 0x088000
pci 0000:ff:13.1: [8086:3c43] type 00 class 0x110100
pci 0000:ff:13.4: [8086:3ce6] type 00 class 0x110100
pci 0000:ff:13.5: [8086:3c44] type 00 class 0x110100
pci 0000:ff:13.6: [8086:3c45] type 00 class 0x088000
ACPI: PCI: Interrupt link LNKA configured for IRQ 11
ACPI: PCI: Interrupt link LNKB configured for IRQ 10
ACPI: PCI: Interrupt link LNKC configured for IRQ 5
ACPI: PCI: Interrupt link LNKD configured for IRQ 3
ACPI: PCI: Interrupt link LNKE configured for IRQ 0
ACPI: PCI: Interrupt link LNKE disabled
ACPI: PCI: Interrupt link LNKF configured for IRQ 0
ACPI: PCI: Interrupt link LNKF disabled
ACPI: PCI: Interrupt link LNKG configured for IRQ 7
ACPI: PCI: Interrupt link LNKH configured for IRQ 11
iommu: Default domain type: Translated
iommu: DMA domain TLB invalidation policy: lazy mode
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
mctp: management component transport protocol core
NET: Registered PF_MCTP protocol family
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0xb05ab000-0xb3ffffff]
e820: reserve RAM buffer [mem 0xbb0aa000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbb897000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbbd26000-0xbbffffff]
pci 0000:03:00.0: vgaarb: setting as boot VGA device
pci 0000:03:00.0: vgaarb: bridge control possible
pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved
system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved
system 00:00: [mem 0xfed00400-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed45000-0xfedfffff] has been reserved
system 00:00: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:01: [mem 0xfbffc000-0xfbffdfff] could not be reserved
system 00:02: [io 0x0a00-0x0a1f] has been reserved
system 00:02: [io 0x0a20-0x0a2f] has been reserved
system 00:02: [io 0x0a30-0x0a3f] has been reserved
pnp 00:05: [dma 0 disabled]
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:08: [io 0x0400-0x0453] has been reserved
system 00:08: [io 0x0458-0x047f] has been reserved
system 00:08: [io 0x1180-0x119f] has been reserved
system 00:08: [io 0x0500-0x057f] has been reserved
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:08: [mem 0xff000000-0xffffffff] has been reserved
system 00:09: [io 0x0454-0x0457] has been reserved
pnp: PnP ACPI: found 10 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered PF_INET protocol family
IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
TCP: Hash tables configured (established 262144 bind 65536)
MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
NET: Registered PF_XDP protocol family
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:00:02.0: PCI bridge to [bus 03]
pci 0000:00:02.0: bridge window [mem 0xf9000000-0xfb0fffff]
pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 04]
pci 0000:00:11.0: PCI bridge to [bus 05]
pci 0000:00:1c.0: PCI bridge to [bus 06]
pci 0000:00:1c.4: PCI bridge to [bus 07]
pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff]
pci 0000:00:1e.0: PCI bridge to [bus 08]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
pci_bus 0000:00: resource 9 [mem 0xcc000000-0xffffffff window]
pci_bus 0000:03: resource 1 [mem 0xf9000000-0xfb0fffff]
pci_bus 0000:03: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
pci_bus 0000:07: resource 1 [mem 0xfb100000-0xfb1fffff]
pci_bus 0000:08: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:08: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:08: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:08: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:08: resource 8 [mem 0x000a0000-0x000dffff window]
pci_bus 0000:08: resource 9 [mem 0xcc000000-0xffffffff window]
pci 0000:00:05.0: disabled boot interrupts on device [8086:3c28]
pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x750 took 18156 usecs
pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x750 took 19504 usecs
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x00000000ab9a6000-0x00000000af9a6000] (64MB)
Trying to unpack rootfs image as initramfs...
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=41 max_order=23 bucket_order=0
zbud: loaded
integrity: Platform Keyring initialized
integrity: Machine keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Freeing initrd memory: 65908K
alg: self-tests for CTR-KDF (hmac(sha256)) passed
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Monitor-Mwait will be used to enter C-1 state
ACPI: \_SB_.SCK0.C000: Found 1 idle states
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: button: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: button: Power Button [PWRF]
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: Registered erst as persistent store backend
00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
ACPI: bus type drm_connector registered
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xfb225000 port 0xfb225100 irq 31
ata2: SATA max UDMA/133 abar m2048@0xfb225000 port 0xfb225180 irq 31
ata3: SATA max UDMA/133 abar m2048@0xfb225000 port 0xfb225200 irq 31
ata4: SATA max UDMA/133 abar m2048@0xfb225000 port 0xfb225280 irq 31
ata5: SATA max UDMA/133 abar m2048@0xfb225000 port 0xfb225300 irq 31
ata6: SATA max UDMA/133 abar m2048@0xfb225000 port 0xfb225380 irq 31
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: irq 16, io mem 0xfb227000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 6.1.30-1-lts ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: irq 23, io mem 0xfb226000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 6.1.30-1-lts ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usbcore: registered new interface driver usbserial_generic
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: registered as rtc0
rtc_cmos 00:06: setting system clock to 2023-08-23T20:34:14 UTC (1692822854)
rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
efifb: probing for efifb
efifb: No BGRT, not showing boot graphics
efifb: framebuffer at 0xe0000000, using 1920k, total 1920k
efifb: mode is 800x600x32, linelength=3200, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
hid: raw HID events driver (C) Jiri Kosina
drop_monitor: Initializing network drop monitor service
Initializing XFRM netlink socket
NET: Registered PF_INET6 protocol family
Segment Routing with IPv6
RPL Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
NET: Registered PF_PACKET protocol family
microcode: sig=0x206d7, pf=0x1, revision=0x710
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 0cd463d174e2070d2d51ef62220aed00ebc7ff7f'
zswap: loaded using pool lz4/z3fold
Key type .fscrypt registered
Key type fscrypt-provisioning registered
pstore: Using crash dump compression: zstd
PM: Magic number: 3:892:599
serial8250 serial8250: hash matches
RAS: Correctable Errors collector initialized.
Unstable clock detected, switching default tracing clock to "global"
If you want to keep using the local clock, then add:
"trace_clock=local"
on the kernel command line
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata5: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
Freeing unused decrypted memory: 2036K
Freeing unused kernel image (initmem) memory: 2148K
Write protecting the kernel read-only data: 30720k
Freeing unused kernel image (text/rodata gap) memory: 2040K
Freeing unused kernel image (rodata/data gap) memory: 1216K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
rodata_test: all tests were successful
x86/mm: Checking user space page tables
usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
with arguments:
/init
copytoram
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/sysresccd/boot/x86_64/vmlinuz
archisobasedir=sysresccd
archisolabel=RESCUE1001
usb 1-1.1: new high-speed USB device number 3 using ehci-pci
usb 2-1.7: new full-speed USB device number 3 using ehci-pci
usb 1-1.1: New USB device found, idVendor=8564, idProduct=1000, bcdDevice=11.00
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.1: Product: Mass Storage Device
usb 1-1.1: Manufacturer: JetFlash
usb 1-1.1: SerialNumber: 15M23D9D1M8XTGUD
usb 2-1.7: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.11
usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.7: Product: USB Receiver
usb 2-1.7: Manufacturer: Logitech
usb 1-1.3: new full-speed USB device number 4 using ehci-pci
usb 1-1.3: New USB device found, idVendor=0573, idProduct=1573, bcdDevice=80.07
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3: Product: USB Audio and HID
usb 1-1.3: Manufacturer: CSCTEK
usb 1-1.3: SerialNumber: A34004801402
fbcon: Taking over console
Console: switching to colour frame buffer device 100x37
fuse: init (API version 7.37)
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/0003:046D:C52B.0001/input/input2
cryptd: max_cpu_qlen set to 1000
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host6: usb-storage 1-1.1:1.0
usbcore: registered new interface driver usb-storage
hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.7/input0
input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.1/0003:046D:C52B.0002/input/input3
input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.1/0003:046D:C52B.0002/input/input4
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
usbcore: registered new interface driver uas
r8169 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control
input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.1/0003:046D:C52B.0002/input/input5
hid-generic 0003:046D:C52B.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.7/input1
hid-generic 0003:046D:C52B.0003: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.7/input2
usbhid 1-1.3:1.3: couldn't find an input interrupt endpoint
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
r8169 0000:07:00.0 eth0: RTL8168h/8111h, 00:e0:4f:18:7c:94, XID 541, IRQ 32
r8169 0000:07:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
Console: switching to colour dummy device 80x25
nouveau 0000:03:00.0: vgaarb: deactivate vga console
nouveau 0000:03:00.0: NVIDIA G72 (046100a3)
nouveau 0000:03:00.0: bios: version 05.72.22.43.32
nouveau 0000:03:00.0: fb: 256 MiB DDR2
nouveau 0000:03:00.0: DRM: VRAM: 252 MiB
nouveau 0000:03:00.0: DRM: GART: 512 MiB
nouveau 0000:03:00.0: DRM: TMDS table version 1.1
nouveau 0000:03:00.0: DRM: TMDS table script pointers not stubbed
nouveau 0000:03:00.0: DRM: DCB version 3.0
nouveau 0000:03:00.0: DRM: DCB outp 00: 01000300 00000028
nouveau 0000:03:00.0: DRM: DCB outp 01: 04011322 00000000
nouveau 0000:03:00.0: DRM: DCB outp 02: 020223f1 0040c080
nouveau 0000:03:00.0: DRM: DCB conn 00: 0000
nouveau 0000:03:00.0: DRM: DCB conn 01: 1130
nouveau 0000:03:00.0: DRM: DCB conn 02: 0210
nouveau 0000:03:00.0: DRM: DCB conn 03: 0211
nouveau 0000:03:00.0: DRM: DCB conn 04: 0213
nouveau 0000:03:00.0: DRM: MM: using M2MF for buffer copies
nouveau 0000:03:00.0: DRM: Setting dpms mode 3 on TV encoder (output 2)
logitech-djreceiver 0003:046D:C52B.0003: hiddev96,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.7/input2
nouveau 0000:03:00.0: DRM: allocated 1920x1080 fb: 0x9000, bo (____ptrval____)
fbcon: nouveaudrmfb (fb0) is primary device
input: Logitech Wireless Device PID:404d Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input9
input: Logitech Wireless Device PID:404d Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input10
Console: switching to colour frame buffer device 240x67
hid-generic 0003:046D:404D.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Wireless Device PID:404d] on usb-0000:00:1d.0-1.7/input2:1
nouveau 0000:03:00.0: [drm] fb0: nouveaudrmfb frame buffer device
[drm] Initialized nouveau 1.3.1 20120801 for 0000:03:00.0 on minor 0
scsi 6:0:0:0: Direct-Access JetFlash Transcend 32GB 1100 PQ: 0 ANSI: 6
sd 6:0:0:0: [sda] 61702144 512-byte logical blocks: (31.6 GB/29.4 GiB)
sd 6:0:0:0: [sda] Write Protect is off
sd 6:0:0:0: [sda] Mode Sense: 43 00 00 00
sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 6:0:0:0: [sda] Attached SCSI removable disk
logitech-hidpp-device 0003:046D:404D.0004: HID++ 4.1 device connected.
input: Logitech K400 Plus as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input14
logitech-hidpp-device 0003:046D:404D.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K400 Plus] on usb-0000:00:1d.0-1.7/input2:1
Key type encrypted registered
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: [email protected]
random: crng init done
ISO 9660 Extensions: RRIP_1991A
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Quota mode: none.
EXT4-fs (dm-1): re-mounted. Quota mode: none.
loop: module loaded
loop0: detected capacity change from 0 to 1349680
squashfs: version 4.0 (2009/01/31) Phillip Lougher
overlayfs: "xino" feature enabled using 32 upper inode bits.
systemd[1]: systemd 253.4-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: Hostname set to .
systemd[1]: bpf-lsm: LSM BPF program attached
systemd[1]: Queued start job for default target Multi-User System.
systemd[1]: Created slice Slice /system/getty.
systemd[1]: Created slice Slice /system/modprobe.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Local Encrypted Volumes.
systemd[1]: Reached target Local Integrity Protected Volumes.
systemd[1]: Reached target Path Units.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Swaps.
systemd[1]: Reached target Local Verity Protected Volumes.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Mounting Temporary Directory /tmp...
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module dm_mod...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Starting Load Kernel Module loop...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f).
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Coldplug All udev Devices...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Mounted Temporary Directory /tmp.
systemd-journald[602]: Collecting audit messages is disabled.
systemd[1]: Finished Create List of Static Device Nodes.
systemd[1]: [email protected]: Deactivated successfully.
sd 6:0:0:0: Attached scsi generic sg0 type 0
systemd[1]: Finished Load Kernel Module configfs.
systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module dm_mod.
systemd[1]: Started Journal Service.
systemd-journald[602]: Received client request to flush runtime journal.
dca service started, version 1.12.1
ioatdma: Intel(R) QuickData Technology Driver 5.00
r8169 0000:07:00.0 enp7s0: renamed from eth0
input: PC Speaker as /devices/platform/pcspkr/input/input15
mousedev: PS/2 mouse device common for all mice
i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
i2c i2c-3: 2/4 memory slots populated (from DMI)
iTCO_vendor_support: vendor-support=0
mc: Linux media interface: v0.10
iTCO_wdt iTCO_wdt.1.auto: Found a Patsburg TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)
RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
usb 1-1.3: Warning! Unlikely big volume range (=511), cval->res is probably wrong.
usb 1-1.3: [5] FU [Mic Capture Volume] ch = 1, val = -8192/-1/16
usb 1-1.3: Warning! Unlikely big volume range (=896), cval->res is probably wrong.
usb 1-1.3: [6] FU [PCM Playback Volume] ch = 2, val = -16384/-2048/16
usbcore: registered new interface driver snd-usb-audio
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1b.0: no codecs found!
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
EDAC MC0: Giving out device to module sb_edac controller Sandy Bridge SrcID#0_Ha#0: DEV 0000:ff:0e.0 (INTERRUPT)
EDAC sbridge: Ver: 1.1.2
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
Generic FE-GE Realtek PHY r8169-0-700:00: attached PHY driver (mii_bus:phy_addr=r8169-0-700:00, irq=MAC)
r8169 0000:07:00.0 enp7s0: Link is Down
r8169 0000:07:00.0 enp7s0: Link is Up - 1Gbps/Full - flow control rx/tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp7s0: link becomes ready
iptables-dropped: IN=enp7s0 OUT= MAC=00:e0:4f:18:7c:94:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:d388:5bca:5b53:02b1 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=enp7s0 OUT= MAC=00:e0:4f:18:7c:94:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:d388:5bca:5b53:02b1 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=enp7s0 OUT= MAC=00:e0:4f:18:7c:94:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:d388:5bca:5b53:02b1 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=enp7s0 OUT= MAC=00:e0:4f:18:7c:94:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:d388:5bca:5b53:02b1 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=enp7s0 OUT= MAC=00:e0:4f:18:7c:94:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:d388:5bca:5b53:02b1 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=enp7s0 OUT= MAC=00:e0:4f:18:7c:94:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:d388:5bca:5b53:02b1 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=enp7s0 OUT= MAC=00:e0:4f:18:7c:94:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:d388:5bca:5b53:02b1 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=enp7s0 OUT= MAC=00:e0:4f:18:7c:94:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:d388:5bca:5b53:02b1 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=enp7s0 OUT= MAC=00:e0:4f:18:7c:94:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:d388:5bca:5b53:02b1 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=enp7s0 OUT= MAC=00:e0:4f:18:7c:94:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:d388:5bca:5b53:02b1 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=enp7s0 OUT= MAC=00:e0:4f:18:7c:94:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:d388:5bca:5b53:02b1 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=enp7s0 OUT= MAC=00:e0:4f:18:7c:94:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:d388:5bca:5b53:02b1 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=enp7s0 OUT= MAC=00:e0:4f:18:7c:94:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:d388:5bca:5b53:02b1 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=enp7s0 OUT= MAC=00:e0:4f:18:7c:94:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:d388:5bca:5b53:02b1 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=enp7s0 OUT= MAC=00:e0:4f:18:7c:94:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:d388:5bca:5b53:02b1 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=enp7s0 OUT= MAC=00:e0:4f:18:7c:94:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:d388:5bca:5b53:02b1 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=enp7s0 OUT= MAC=00:e0:4f:18:7c:94:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:d388:5bca:5b53:02b1 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=enp7s0 OUT= MAC=00:e0:4f:18:7c:94:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:d388:5bca:5b53:02b1 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=enp7s0 OUT= MAC=00:e0:4f:18:7c:94:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:d388:5bca:5b53:02b1 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=enp7s0 OUT= MAC=00:e0:4f:18:7c:94:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:d388:5bca:5b53:02b1 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=enp7s0 OUT= MAC=00:e0:4f:18:7c:94:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:d388:5bca:5b53:02b1 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=enp7s0 OUT= MAC=00:e0:4f:18:7c:94:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:d388:5bca:5b53:02b1 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=enp7s0 OUT= MAC=00:e0:4f:18:7c:94:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:d388:5bca:5b53:02b1 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=enp7s0 OUT= MAC=00:e0:4f:18:7c:94:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:d388:5bca:5b53:02b1 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=enp7s0 OUT= MAC=00:e0:4f:18:7c:94:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:d388:5bca:5b53:02b1 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=enp7s0 OUT= MAC=00:e0:4f:18:7c:94:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:d388:5bca:5b53:02b1 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
perf: interrupt took too long (2506 > 2500), lowering kernel.perf_event_max_sample_rate to 79800
iptables-dropped: IN=enp7s0 OUT= MAC=00:e0:4f:18:7c:94:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:d388:5bca:5b53:02b1 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=enp7s0 OUT= MAC=00:e0:4f:18:7c:94:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:d388:5bca:5b53:02b1 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=enp7s0 OUT= MAC=00:e0:4f:18:7c:94:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:d388:5bca:5b53:02b1 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=enp7s0 OUT= MAC=00:e0:4f:18:7c:94:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:d388:5bca:5b53:02b1 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=enp7s0 OUT= MAC=00:e0:4f:18:7c:94:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:d388:5bca:5b53:02b1 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=enp7s0 OUT= MAC=00:e0:4f:18:7c:94:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:d388:5bca:5b53:02b1 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52